CT Density measurement tool +

General discussion for MicroDicom viewer
Post Reply
M2003
Posts: 5
Joined: Mon May 20, 2013 1:02 am

CT Density measurement tool +

Post by M2003 »

Does microdicom has CT Density measurement tool ?

Also, I tried split screen, it did not work? Does this work? Can you sync both windows for comparative studies?

Thanks,
microdicom
Site Admin
Posts: 417
Joined: Thu Jan 01, 1970 2:00 am
Location: Bulgaria
Contact:

Re: CT Density measurement tool +

Post by microdicom »

Sorry, MicroDicom doesn't have CT Density measurement tool.
Juke
Posts: 3
Joined: Wed Mar 30, 2022 1:29 am

Re: CT Density measurement tool +

Post by Juke »

Hi
Does MicroDicom still not have a CT density measurement tool?
microdicom
Site Admin
Posts: 417
Joined: Thu Jan 01, 1970 2:00 am
Location: Bulgaria
Contact:

Re: CT Density measurement tool +

Post by microdicom »

You can see every pixel value in Hounsfield units (HU) and its coordinates are displayed at the bottom right corner.
5AOu4URZhv.png
5AOu4URZhv.png (193.4 KiB) Viewed 1399 times
Juke
Posts: 3
Joined: Wed Mar 30, 2022 1:29 am

Re: CT Density measurement tool +

Post by Juke »

Hi
I can see that provides a point measurement, can you average over a larger area i.e.a circle
Thanks
microdicom
Site Admin
Posts: 417
Joined: Thu Jan 01, 1970 2:00 am
Location: Bulgaria
Contact:

Re: CT Density measurement tool +

Post by microdicom »

You have to use circle, rectangle or closed curve measurements. There is mean value in the information box.
mDicom_qFql8PixV4.png
mDicom_qFql8PixV4.png (289.1 KiB) Viewed 1041 times
Juke
Posts: 3
Joined: Wed Mar 30, 2022 1:29 am

Re: CT Density measurement tool +

Post by Juke »

I cant see the mean etc and the measure and annotate tool is not giving me an option to tick additional boxes
Ive reset to default settings
user0112
Posts: 2
Joined: Sat Apr 30, 2022 6:32 pm

Re: CT Density measurement tool +

Post by user0112 »

>>I cant see the mean etc
I noticed that ROI size has to be bigger to see mean, etc. So, you may try making a bit larger ROI.
microdicom
Site Admin
Posts: 417
Joined: Thu Jan 01, 1970 2:00 am
Location: Bulgaria
Contact:

Re: CT Density measurement tool +

Post by microdicom »

Juke wrote: Tue Apr 26, 2022 6:40 am I cant see the mean etc and the measure and annotate tool is not giving me an option to tick additional boxes
Ive reset to default settings
This inquiry was fixed with downloading the latest version.
user0112 wrote: Sat Apr 30, 2022 9:10 pm >>I cant see the mean etc
I noticed that ROI size has to be bigger to see mean, etc. So, you may try making a bit larger ROI.
I logged this issue in the defect list and will be fixed soon.
Post Reply